資源共享吧|易語言論壇|逆向破解教程|輔助開發教程|網絡安全教程|hailashopping.com|我的開發技術隨記

//who.c
#include <stdio.h>
#include <unistd.h>
int main()
{
while(1) {
printf("who are you ?\n");
sleep(2);
}
return0;
}

//isme32.c
int main()
{
__asm__(
"jmp forward\n\t"
"backward:popl %esi\n\t"
"movl $4, %eax\n\t"
"movl $2, %ebx\n\t"
"movl %esi, %ecx\n\t"
"movl $12, %edx\n\t"
"int $0x80\n\t"
"int3\n\t"
"forward:call backward\n\t"
".string \"it's me ~\\n\""
);
return0;
}

//isme64.c
int main()
{
__asm__(
"jmp forward\n\t"
"backward:popq %rsi\n\t"
"movq $1, %rax\n\t"
"movq $2, %rdi\n\t"
"movq $12, %rdx\n\t"
"syscall\n\t"
"int3\n\t"
"forward:call backward\n\t"
".string \"it's me ~\\n\""
);
return0;
}

// inject.c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ptrace.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/user.h>
#include <errno.h>


// 注入指令塊(打印"it's me ~")
#ifdef ENV_I386
#define CODE \
    "\xeb\x15\x5e\xb8\x04\x00\x00\x00"\
    "\xbb\x02\x00\x00\x00\x89\xf1\xba"\
    "\x0c\x00\x00\x00\xcd\x80\xcc\xe8"\
    "\xe6\xff\xff\xff\x69\x74\x27\x73"\
    "\x20\x6d\x65\x20\x7e\x0a\x00"
#define REG_IP  regs.eip
#else   // X_64
#define CODE \
    "\xeb\x19\x5e\x48\xc7\xc0\x01\x00"\
    "\x00\x00\x48\xc7\xc7\x02\x00\x00"\
    "\x00\x48\xc7\xc2\x0c\x00\x00\x00"\
    "\x0f\x05\xcc\xe8\xe2\xff\xff\xff"\
    "\x69\x74\x27\x73\x20\x6d\x65\x20"\
    "\x7e\x0a\x00"
#define REG_IP  regs.rip
#endif

#define CODE_SIZE (sizeof(CODE)-1)


/* 往pid進程的addr地址處寫數據 */
voidputdata(pid_t pid, unsigned longaddr, void*vptr, intlen)
{
    intcount = 0;
    longword;

    while(count < len)
    {
        memcpy(&word, vptr+count, sizeof(word));
        word = ptrace(PTRACE_POKEDATA, pid, addr+count, word);
        count += sizeof(word);

        if(errno!= 0)
            printf("putdata failed: %p\n", (void*)(addr+count));
    }
}

/* 讀pid進程addr地址處的數據 */
voidgetdata(pid_t pid, unsigned longaddr, void*vptr, intlen)
{
    inti = 0, count = 0;
    longword;
    unsigned long*ptr = (unsigned long*)vptr;

    while(count < len)
    {
        word = ptrace(PTRACE_PEEKDATA, pid, addr+count, NULL);
        count += sizeof(word);
        ptr[i++]  = word;

        if(errno!= 0)
            printf("getdata failed: %p\n", (void*)(addr+count));
    }
}


intmain(intargc, char*argv[])
{
    pid_t pid;
    structuser_regs_struct regs;
    charbackup[CODE_SIZE+1];

    if(argc != 2) {
        printf("Usage: %s {pid}\n", argv[0]);
        return-1;
    }

    // 通過啟動參數，獲取被注入進程號，并attach
    pid = atoi(argv[1]);
    ptrace(PTRACE_ATTACH, pid, NULL, NULL);  // SIGTRAP
    if(errno!= 0)
        printf("attach failed: %s\n", strerror(errno));
    wait(NULL);  // 收到回復信號，保證后續過程在attach完成的情況下執行

    // 獲取被注入進程當前寄存器值
    ptrace(PTRACE_GETREGS, pid, NULL, &#174;s);
    // 備份*ip寄存器指向的指令塊
    getdata(pid, REG_IP, backup, CODE_SIZE);
    // 替換為CODE指令塊
    putdata(pid, REG_IP, CODE, CODE_SIZE);
    // 恢復被注入進程的執行
    ptrace(PTRACE_CONT, pid, NULL, NULL);    // SIGCONT
    // 注入程序最后一條指令為int3，此為即為等待注入指令塊執行完畢
    wait(NULL);

    // 等待用戶輸入，方便查看結果
    printf("continue to execute the orginal process, press any key ..\n");
    getchar();

    // 將修改的指令塊恢復為備份內容
    putdata(pid, REG_IP, backup, CODE_SIZE);
    // 恢復被注入進程寄存器值
    ptrace(PTRACE_SETREGS, pid, NULL, &#174;s);

    // detach,被注入進程恢復正常執行
    ptrace(PTRACE_DETACH, pid, NULL, NULL);

    return0;
}